NVRAM
Add
7C436110-AB2A-4BBB-A880-FE41995C9F82
We can use this dictionary to modify boot-args. Use the chart below for various arguments that possibly be useful later in the future. For the Recovery and Installation, before the GPU passthrough, you don’t need to modify this section.
General Boot-Args
| boot-arg | Description |
|---|---|
| -v | This enables verbose mode, which shows all the behind-the-scenes text that scrolls by as you’re booting instead of the Apple logo and progress bar. It’s invaluable to any Hackintosher, as it gives you an inside look at the boot process, and can help you identify issues, problem kexts, etc. |
| keepsyms=1 | This is a companion setting to debug=0x100 that tells the OS to also print the symbols on a kernel panic. That can give some more helpful insight as to what’s causing the panic itself. |
| nehalem_error_disable | This disables AppleTyMCEDriver so the virtual RAM on MacPro5,1 / MacPro4,1 does not cause a kernel panic. |
GPU Related Boot-Args
The following boot-args are WhateverGreen boot args! They require the kext to be in use.
| boot-arg | Description |
|---|---|
| agdpmod=vit9696 | Disables board-id check, may be needed for when screen turns black after finishing booting. |
| agdpmod=pikera | Used for disabling board ID checks on some Navi GPUs (RX 5000 & 6000 series). Don’t use if you use NootRX. |
| radpg=15 | Fixes initialization for HD 7730/7750/7770/R7 250/R7 250X |
| raddvi | Fixes DVI connector-type for 290X, 370, etc |
| radvesa | Forces GPU into VESA mode(no GPU acceleration), useful for troubleshooting. |
| igfxvesa | Forces Intel iGPU into VESA mode |
The following boot-args are Apple boot flags and will work without WEG.
| boot-arg | Description |
|---|---|
| nv_disable=1 | Forces GPU into VESA mode. |
| amd_no_dgpu_accel | Forces GPU into VESA mode. |
Delete
Forcibly rewrites NVRAM variables, do note that Add will not overwrite values already present in NVRAM so values like boot-args should be left alone.
LegacyOverwrite
For us, we can leave it to the default value of False.
LegacySchema
Used for assigning NVRAM variables, used with OpenVariableRuntimeDxe.efi. Only needed for systems without native NVRAM. The values under this can be deleted safely.